Skull Cavern Elevator at Stardew Valley Nexus 您所在的位置:网站首页 ladder locator翻译 Skull Cavern Elevator at Stardew Valley Nexus

Skull Cavern Elevator at Stardew Valley Nexus

2024-06-14 10:04| 来源: 网络整理| 查看: 265

This Mod is based on SMAPI 3.0+, for installing SMAPI refer to https://smapi.io/.For installation unpack the zip-File in the Mods Folder, just like any other SMAPI Mod.

An elevator like in the normal mine is added to the Skull Cavern, like in the normal mine the elevator is updated every 5th Floor by default.Note: The elevator is always placed to the right of the ladder.

If you want to support us, feel free to leave us a tip at: Buy me a CoffeeThanks

Update 1.1.2

In the folder SkullCavernElevator there will be a file called config.json after starting the game with the mod, in this file you can change how frequent the elevators appear. You just need to change the value behind the "elevatorStep" : (the 5). 

Update 1.2.1A new setting called "difficulty" has been added to the config.json file. It changes the number of elevator levels appearing in the menu. The value is calculated as follows: deepestMineLevel/elevatorSteps/difficulty.

Update 1.3.0A new setting called "FirstLevelElevatorActive": has been added to the config.json file. It is used as a workaround if the elevator is not shown in the entrance area, but if set to "true" the elevator will appear in the first floor.Update 1.4.0The settings in the config.json were renamed to start with a Capital letter, difficulty -> Difficulty, elevatorStep -> ElevatorStep, firstLevelElevatorActive -> FirstLevelElevatorActive.

A new setting called "ElevatorCostPerStep": with default value 0 has been added to the config.json file. If this value is set to > 0, a cost will be calculated and displayed in the elevator menu. The formula is (Position of Elevator displayed) * ElevatorCostPerStep. This cost will be subtracted from your current available money. If you do not have enough, the elevator will not be used.

Difficulty and elevator setting

A few examples to illustrate how difficulty and elevatorStep work. In all examples it is assumed that the lowest mine level reached is 40.First elevatorStep, this changes step width between elevators appearing.elevatorStep 5 (and default difficulty 1) means when you reach level 40 of the SkullCavern, you will see the elevators: 5, 10, 15, 20, 25, 30, 35 and 40elevatorStep 10 (and default difficulty 1) means when you reach level 40 of the SkullCavern, you will see the elevators: 10, 20, 30 and 40

Difficulty setting changes how difficult it is to travel further down with the elevator.Difficulty 2 (and default elevatorStep 5) means when you reach level 40 of the SkullCavern, you will only see elevators up to level 20 (My Lowest Level[40]/Difficulty[2]). Means elevators: 5, 10, 15 and 20Difficulty 4 (and default elevatorStep 5) means when you reach level 40 of the SkullCavern, you will only see elevators up to level 10 (My Lowest Level[40]/Difficulty[4]). Means elevators: 5 and 10As you can see, a higher value in Difficulty means that less elevators appear and you need to get further down to unlock new elevators.

A combination of elevatorStep and Difficulty can look like this:Difficulty 1.5 and elevatorStep 10 means when you reach level 40 of the SkullCavern, you will only see elevators up to level (Lowest Level[40]/Difficulty[1.5]) 26. Means elevators: 10 and 20. (due to the elevatorStep of 10).

Official Discussion Thread



【本文地址】

公司简介

联系我们

今日新闻

    推荐新闻

    专题文章
      CopyRight 2018-2019 实验室设备网 版权所有